do not press the red button white button location

It doesn't mean we immediately go dark due to windows on both sides, but it usually means that someone needs to go turn the lights on again and tell the customer what the right button is. They press the switch, and all the lights on the first floor turn off. When our visiting customers first visit and leave, they see these 3 buttons and likely think 'that red button is dangerous and I should not press that, that top switch seems to be for the light, that means that other switch is probably for the door'. The outside switch is marked 'lights outside and garage' and the first floor switch is marked 'general'. We also have 2 regular big flat light switches next to that giant button, one for the lights outside and one for all the lights on the first floor.

To open the door from the inside, you need to press a giant unmarked red button to the right of the door frame, the type of button that's usually used as a kill switch on a factory floor. Wake up may be still performed manually by clicking the Button 4 times.Our office front doors use an electronic lock to enter and exit (but can also be opened using a key). Setting wake up interval to 0 disables sending Wake Up notification to the controller automatically. no Z-Wave range) the device will go into Z-Wave communication standby and retry to establish connection with the main controller after the next time interval. The Button will wake up at each defined time interval and always try to connect with the main controller. Longer wake up time interval means less frequent communication and thus a longer battery life.Īfter successful communication attempt, the device will update configuration parameters, associations and settings and then will go into Z-Wave communication standby.Īfter failed communication attempt (eg. Press the button 4 times to wake up the device.Īvailable settings: 0 or 3600-64800 (in seconds, 1h – 18h).Select the appropriate device from the list.In order to configure the Button (using the Home Center controller): The settings are available in the FIBARO interface as simple options that may be chosen by selecting the appropriate box.

The Button allows to customize its operation to user’s needs.

Do not press the red button white button location